First Second Third First Second Third

Course Detail

IWCF Well Control - Surface Stack :(Level 3 & Level 4)
Duration:5 Days

COURSE OBJECTIVES

Level 3

The objective of this course is to teach well control competency to drillers and others requiring a Level 3 certification. A secondary objective is to prepare participants for the IWCF Well Control exams. Certification is given for Surface or Combined Surface and Subsea. BOP equipment, kick detection, shut-in procedures, kill sheets, and methods of well control will be taught. The simulator work in the course focuses on detecting kicks, and closing in the well, and handling an assortment of simulated problems.

The candidates will gain theoretical knowledge about well control and master practical skills necessary to apply the theoretical knowledge in blowout prevention and well control. At the end of this course, delegates should be able to demonstrate familiarity with an understanding of the simulation practical assessment, written examination in equipment, principles and procedures associated with rotary drilling well control in preparation for IWCF Well Control testing at Level 3. The successful candidate will be issued with a certificate valid for two years.

Level-4:

The objective of this course is to teach well control competency to ToolPushers, OIMs, Wellsite Supervisors, Superintendents, and Engineers. A secondary objective is to prepare participants for the IWCF Well Control certification exams. Certification can be taken for Surface or Combined Surface and Subsea. BOP equipment, drilling fluids, barrier management, kick detection, shut-in procedures, kill sheets, various methods of well control, and organizing a well control operation are all taught in this course. A thorough understanding of how well control problems develop, how they should be solved, and how to prevent them will be discussed. There is an extensive amount of simulator work in the course with an assortment of simulated problems.

The candidates will gain theoretical knowledge about well control and master practical skills necessary to apply the theoretical knowledge in blowout prevention and well control. At the end of this course, delegates should be able to demonstrate familiarity with an understanding of the simulation practical assessment, written examination in equipment, principles and procedures associated with rotary drilling well control in preparation for IWCF Well Control testing at Level 4. The successful candidate will be issued with a certificate valid for two years.

Course Overview

The course duration is five days. Course starts on Tuesday at 0830 hrs. & finishes on Saturday at 1400 hrs. For first three days extensive class room teaching is followed by practical sessions on simulator. Assignment containing questions pertaining to days curriculum are given and discussion on assignment is taken up in the next morning.

On fourth day a mock test is conducted which is an in- house test based on IWCF pattern. This is to access the performance of the participants and prepare them for the final test. Individual attention is given to the participants based on the results of the Mock test. Simulator Practical Assessment. On fifty day, there will be written examination and certification.

DAY 1 : Well Control Event & Incident, Well Control Training Assessment, Risk Management, Introduction to Well Control and Pressure, Barrier Concept, Kick and Concept of Bottomhole Pressure, Kick warning Sign and Kick Indicator (Detection), Top Hole Drilling, Kill Sheet preparation, Simulator hand on practice.

DAY 2: Assignment Discussion, Concept of Circulating System, Concept of Fracture Pressure and MAASP, Influx Characteristic and its behavior, Shut in Procedure, Gas Migration, Well Control Method, Kill Sheet preparation, Simulator hand on practice.

DAY 3: Assignment Discussion, Volumetric Method, Stripping, Well Control During Casing and Cementing Operation, Well control Management, Contigency Planning, Well Control Equipment, Ram Type Preventer, Associated Well Control Equipment, BOP and Equipment Test, Inflow Test, Simulator hand on practice.

DAY 4: Assignment Discussion, BOP Control System, Subsea BOP Control System, MOCK Test, Simulation Practical Assessment

DAY 5: Examination and Certification

Course Fee

INR: ₹ 60000 + 14.5% service tax
USD: $ 1300

Fee including registration and exam fee, breakfast, tea/coffee, lunch, evening snacks, study material, stationeries. This fee does not include accommodation and transportation. The above said course f

Course Dates

MUMBAI:
November
7th Nov - 11th Nov 2017
14th Nov - 18th Nov 2017
21st Nov - 15th Nov 2017
28th Nov - 2nd Dec 2017
-
December
5th Dec - 9th Dec 2017
12th Dec - 16th Dec 2017
19th Dec - 23rd Dec 2017
26th Dec - 30th Dec 2017
-
January
2nd Jan - 6th Jan 2018
9th Jan - 13th Jan 2018
16th Jan - 20th Jan 2018
23rd Jan - 27th Jan 2018
-